Pfaff select 1530 Owner's Manual - Page 21
Needle threader Model 1540, Threading the twin needle
View all Pfaff select 1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
A B Operate your Pfaff select Needle threader (Model 1540) To make threading the needle easier and quicker, you have been provided with the PFAFF needle threader (13). Lower the presser foot. Turn the handwheel until the needle is at its highest position. Place the needle thread under hook A and hold it taut. Move the needle threader fully downwards and turn it towards the needle so that the small hook B goes through the needle eye. Place the thread into the hook from below. Turn the needle threader towards the rear, releasing the thread carefully, and allow the threader to move upwards. You can now pull the thread through the needle eye. Threading the twin needle Insert the twin needle. Fit the second spool holder and place one spool of thread on each holder. A In the left threading slot (11) you will find tension disk A. During threading, make sure that you pass one thread left and one thread right over tension disk A. Carry on threading in the usual way, but make sure the threads are not twisted with each other. Pull the threads right and left into thread guide (25) and thread the needles. Note: You cannot use the needle threader for a twin needle (Model 1540). 11