Pfaff select 4.0 Owner's Manual - Page 13

Operate your Pfaff select A B C Winding the bobbin from the spool pin Place the sewing thread on the spool A pin (9). To guarantee free movement of the thread and to give additional B hold to the thread spool, Àt a spool cap corresponding to the size of the thread spool. Threading Place the thread into guide A and pull it through opening B and to the right under the hook C. Wind the thread clockwise a few times around in the bobbin. Winding Switch on the main switch (1). Hold the end of the thread Àrmly and press the foot control. The winding action will stop automatically as soon as the bobbin is full. Cut the thread, push the bobbin to the left and remove it. Don't forget: Turn the handwheel release disk (3) fully back again. Then turn the handwheel (4) towards you until it snaps into place. 13