Pfaff select 4.0 Owner's Manual - Page 36
Free Motion Sewing, Sewing on buttons - sewing machine manual
View all Pfaff select 4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Free Motion Sewing Insert the darning foot: Loosen screw D. Set the needle at its highest point and push the pin of the darning foot fully into the hole C of the sewing foot holder. When doing this, the guide fork G should position itself around the presser bar. The lever E must be behind the Àxing screw F. Now tighten screw D. Free Motion Position: Lower the presser foot lifter (A) while pushing it lightly to the rear. This snaps the presser foot lifter into a notch (B) on the back side of the sewing machine into the free motion position. • Drop the feed dog. • Select a straight stitch or a zigzag stitch. • Keep an even speed, manually move your fabric. Tip: For even stitches, move your fabric at a smooth even Áow. Move the fabric so the stitching does not cross. D C Stitch 4.0 G 3.0 G 2.0 G - B E F G - 2-3 6 - 2-3 optio- nal - - 2-3 A Utility stitches and practical sewing Sewing on buttons With zigzag stitch G (stitch width 4 mm) you can sew on two and four hole buttons. • Remove the sewing foot and lower the feed dog. • Turn the handwheel towards you and move the button so that the needle enters the left hole in the button. • Now lower the presser foot lifter; this holds the button in place. 36