Pfaff smart 100s Owner's Manual - Page 13

Attaching the presser foot holder/presser foot!seam guide Raise the presser bar (a). (1) Attach the presser foot holder (b) as illustrated. Attaching the presser foot Lower the presser foot holder (b) until the cut-out (c) is directly above the pin (d). (2) Raise the lever (e). Lower the presser foot holder (b) and the presser foot (f) will engage automatically. Removing the presser foot Raise the presser foot. (3) Raise the lever (e) and the foot disengages. Note: You can use the standard foot for all stitches. Attaching the seam guide Attach the seam guide (g) an the slot as illustrated Adjust according to need for hems, pleats, etc (4) Attention Twn power switch to off ("0") when canying out any of the above erations! 10 f 2