Pfaff smart 300E Owner's Manual - Page 37
Hooping
View all Pfaff smart 300E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hooping For better embroidery results place a layer of stabilizer under the fabric and hoop both the stabilizer and fabric. The fabric and stabilizer must be smooth and taut in the hoop. Any distortion of the fabric will impair the finished quality of the embroidery. 1. Loosen the hoop screw and remove the inner hoop. 2. Lay the outer hoop in front of you with the guide pins for putting it on the embroidery unit on the right. 3. Place the stabilizer and then the fabric over the outer hoop, with the right side up. Ensure that the fabric is draped over the edge of the hoop. H-1 CONNECTIVITY TO YOUR COMPUTER There are two main types of embroidery stabilizer - cutaway and tearaway. Choose cutaway stabilizer for knit fabrics and other unstable fabrics because it provides better support. Use tearaway for stable woven fabrics. 35