Pfaff tipmatic 6152 Owner's Manual - Page 88
Removal, Replacing, Cleaning, oiling, Switch, switch, Remove, needle plate, lower, Changing, needle
View all Pfaff tipmatic 6152 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
I A Changing the needle plate Switch off the main switch It is very important to clean and oil the sewing machine, because it will reward you with a longer service life. The more often you use the machine, the more care it needs. Removal: - Raise the sewing foot and remove the deta chable work support. - Push the point of a small screwdriver into the opening between needle plate and sewing machine. Twist it lightly to the right and the needle plate will snap half way out of its mounting. Now push the screwdriver into the left opening and take the needle plate out. A Cleaning and oiling Switch off the main switch - Remove the needle plate and lower the teed dog. - Clean the feed dog and hook area with the brush. Then apply a drop of oil every 15 to 20 hours of operation) to the hook. You can see where to apply the oil in the illustration and on the provided oil bottle. Otherwise, the machine is maintenance-tree and must not be oiled. Replacing - Place the needle on flat at the back and push it down with both hands at the front until you hear it snap in place. Before you start sewing, check that the needle plate is lying flat. 86