Pfaff tipmatic 6152 Owner's Manual - Page 90
watts
View all Pfaff tipmatic 6152 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
I 4' , bJj r Ii I Changing the sewing lamp Switch oft the main switch - Disconnect the mains plug and the foot control plug from the machine. - Take off the detachable work support (14). The sewing lamp is located inside the needle head of the sewing machine. Removal To be able to change the sewing lamp, we recommend placing the sewing machine on its side as illustrated. - Hold the sewing machine tightly. - Push the lamp into its holder as far as it will go. - At the same time, turn the lamp a half turn anti-clockwise and remove it. Insertion - Insert the lamp in the diagonal holder and turn it so that both stops of the lamp engage. - Now push the lamp fully into the holder and turn it clockwise so that it is held firmly. Note: The lamp changer (available as a special accessory) will make changing the lamp much easier. Important! The maximum permissible wattage of the lamp with a plug-in socket is 15 watts! 87