Philips 20PF9925 User Guide - Page 3

Preparation & Place the TV on a solid surface. ' Power:This TV operates on a DC supply provided by the AC-DC adaptor.The voltage is as indicated on the label on the back cover. min. 1m DC 15V _ + Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing. é Insert the aerial plug firmly into the aerial socket ANT IN x 75 Ω at the back of the TV. CABLE . ANT IN x75 Ω " Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type R6-1.5V). Only use the AC-DC adaptor supplied with the TV and never apply an AC mains to the TV directly.The AC-DC adaptor operates on an AC mains supply, the voltage is as indicated on the label of the AC-DC adaptor. Connect the DC plug of the AC-DC adaptor to the DC 15V socket at the back of the TV. Connect the AC-DC adaptor and its mains cord. Insert the mains plug in the wall socket having a mains voltage of 110V-240V. ( Switch the TV on: Press the power key at the front side of the TV to switch it on or off. If the TV is in standby mode, the standby indicator in front of the TV illuminates brightly. Press the standby key B again or the - P + key or one of the digit keys on the remote control to switch the TV on. R6 / 1,5 V Preparation 3