Philips 26HF5335D User manual - Page 48
SWITCH ON VOLUME cannot exceed the MAXIMUM VOLUME level. Whenever
View all Philips 26HF5335D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
OSD DISPLAY ON Normal screen information is displayed (e.g. channel information) OFF Screen information is suppressed (except for some VGA input, if present) SWITCH ON VOLUME When the user switches the TV ON, it will play at the specified volume level. Note: "SWITCH ON VOLUME" cannot exceed the MAXIMUM VOLUME level. Whenever the BDS Mode Setup menu is accessed, the current volume level is reset to the SWITCH ON VOLUME level. MAXIMUM VOLUME This option specifies the maximum allowable volume level of the TV. SWITCH ON CHANNEL When the user powers on the TV, it will tune to the channel specified by this setting. The switch on channel is selected from a list of installed channels. HIGH SECURITY MODE ON This allows access to the BDS Mode Setup Menu via the special BDS Setup Remote only. OFF This allows access to the BDS Mode Setup Menu via BDS Setup Remote or via normal Remote Control (using a special key code sequence). POWER ON The Power On function allows the TV to enter a specific mode of operation (On or Standby) after the mains power is activated. ON When set, the TV will always turn ON after the mains power is enabled. STANDBY When set, the TV will always turn to STANDBY after mains power is enabled DISPLAY MESSAGE ON Enables display of the Welcome Message for 30 seconds after the TV set is turned on OFF Disables the display of the Welcome Message. If OSD DISPLAY is set to OFF, then the Welcome Message is automatically disabled. WELCOME MESSAGE The Welcome Message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on. This helps to personalize the hotel experience for guests. The Welcome Message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric characters. Use the arrow keys of the Remote Control to compose the Welcome Message. To enable the display of the Welcome Message, the DISPLAY MESSAGE option must be ON USB BREAK IN When enabled, this function allows easy access and navigation to any USB device attached to the USB connector on the TV set (when BDS Mode is ON). Version 1.4