Philips 27DVCR55S User manual - Page 54

54 Track Play There are three ways to play a Track on an Audio CD. Use the Number buttons, the SEARCH MODE button, or i/g and j/h. q Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. Make sure an Audio CD is in the disc tray. A Using the Number Buttons Press the Number buttons to enter a Track number. Play will start at the selected Track. For single-digit Tracks (1-9), press a single Number button. For Tracks 10 and above, press the +100/+10 button so the Search display (TR - - ) appears on the TV. Press the Number button of the first digit, then press the Number button of the second digit. For example, to play Track 26, press +100/+10, then Number 2, then Number 6. If you enter a Track number that is not available on the Disc, play will not begin (or the current Track will continue to play). A-B C B STANDBY-ON PICTURE SLEEP SELECT 123 CH. 456 789 +100 0 +10 SPEED C.RESET ZOOM VOL. MUTE RECORD PLAY STOP DISC MENU DISPLAY SETUP TITLE ENTER RETURN CLEAR SEARCH MODE REPEAT REPEAT A-B MODE AUDIO SUBTITLE ANGLE PHILIPS B Using SEARCH MODE Press SEARCH MODE so the Track Search display (TR) appears. Within 30 seconds, press the Number buttons to select the Track number. Play will begin at the selected Track. For a single-digit Track (1-9), enter a zero first. For example, to play Track 5, press 0, 5. You do not have to use the +100/+10 button in Search Mode for Tracks 10 and above. C Using i/g and j/E During play, press i/g to skip the current Track and move to the next Track. Press j/h to return to the beginning of the current Track or to go to previous Tracks. Helpful Hints • The H/h and G/g buttons are not active when play is stopped. • You cannot use G/g to go from the last Track on the Disc to the first Track.