Philips 27HT7210D User manual - Page 12

TV SETUP MENU & SUB-MENUS * LANGUAGE (ENGLISH / ESPANOL / FRANCAIS) When you first enter the TV SETUP Menu, LANGUAGE is highlighted. Scroll to the LANGUAGE item, select other languages with the Æ or Í button on the remote control. * CHANNEL INSTALL > When selected, CHANNEL INSTALL menu appears. Configure the inputs and channels as seen here. INPUT 1 Select the channel or input you wish to configure. 2 Select the channel or input you wish to associate with the specific CHANNEL. This feature enables you to "map" (re-assign) a numeric channel number to a video input, rather than to its normal RF TV channel (i.e. ANTENNA) channel 2. Note : Although it is possible to map a given video source (eg CVI) to another video source (eg. S-VIDEO) this is not advisible as it may lead to confusion. CHANNEL INPUT AUTO PROGRAM CHANNEL RING LABEL VIDEO BLANK AUDIO MUTE CHANNEL INSTALL TV 2-125 / AV2 / SIDE / S-VIDEO / CVI / DIGITAL ANTENNA / AV2 / SIDE / S-VIDEO/ CVI / DIGITAL > SAVED / DELETED MYLABEL > NO / YES NO / YES TV Setup - Channel Install (Commercial Mode) AUTO PROGRAM 1 When AUTO PROGRAM is selected, the TV performs an automatic search for the presence of viable RF signals at its tuner input. An AUTO PROGRAMMING ACTIVE TABLE of active numbers will appear. When a viable signal is detected on a given channel, that channel is highlighted in red and is added to the channel ring. 2 If CABLE TUNING is set to NO, channels 2 through 69 will be checked. When a viable signal is detected on a given channel, that channel is highlighted in red and is added to the channel ring. 3 Pressing any key on the remote control will terminate the AUTO PROGRAM session. AUTO PROGRAMMING ACTIVE 12 34 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 DIGITAL CHANNEL SEARCH : 22 PRESS ANY KEY TO STOP AUTO PROGRAM CHANNEL RING Specify whether the current channel or input is to be SAVED or SKIPPED from the channel ring (i.e. list of channels available for selection with a guest remote control). LABEL Input a maximum number of 8 characters for the channel's label. Press cursor Æ to start the first character. Cursor Æ or Í to navigate between character positions within the label field. Cursor Î or ï to select characters from the list A-Z or 0 - 9 etc. To exit, press cursor Æ or Í to navigate out of the label editing field. VIDEO BLANK If VIDEO BLANK is set to NO. Video will be displayed. If VIDEO BLANK is set to YES. Video will not be displayed. AUDIO MUTE If AUDIO MUTE is set to NO. The current channel is audible. If AUDIO MUTE is set to YES. The current channel is muted * CABLE TUNING (NO / YES) If CABLE TUNING is set to NO. You are selecting standard off-air tuning If CABLE TUNING is set to YES. You are selecting cable offset tuning. 12