Philips 32HF7544D User manual - Page 10

ACTIVATING TV SETUP MENU The following remote control commands are applicable to Philips Business Display Solutions TV products. These can be used for setup and configuration purposes. WITH GUEST REMOTE CONTROL RC2888/01 (only when SECURITY in the TV SETUP MENU is set to STANDARD. Refer to page 11). To activate TV SETUP MENU : 1 Select a channel number 2 Key in 7 4 3 0 6 8 followed by the m button on the remote control. Note : All buttons (in step 2) on the remote control 7 4 3 0 6 8 m must be pressed successively within 20 seconds or else the TV Setup Menu will not be activated. WITH REMOTE CONTROL RC2573GR (only in TV Commercial Mode). To activate TV Setup Menu 1 Press the F button on the remote control to activate the TV Setup Menu. Menu Items TV SETUP MAIN MENU Options Tuning Mode Switch-On Options • Switch-On Channel • Volume • Picture Format • Power On Security Options • Security Control Options • ESP • Source Menu Item • Picture Format Menu Item • Minimum Volume • Maximum Volume Captioning Options • Save Captioning • Captioning • Analog CC Mode Service Menu • Update Channel • Allow Update Searching • Start Firmware Update • Restore Factory Settings • Show Status Air / Cable Channel 1 - 125 Restore / Volume 0 - 99 Native / Widescreen Standby / Forced / Restore Standard / High Hours : 0 - 99 Yes / No Yes / No Volume 0 - 99 Volume 0 - 99 Yes / No On / On when muted / Off CC1 - CC4 / TXT1 - TXT4 Channel : 0 - 125 Yes / No 1) To scroll through the menu, press Î or ï on the remote control. A highlight indicates that the respective menu item's setting is selected for modification. 2) To modify the setting of the selected menu item press Æ . 3) To exit, press F on the RC2573GR setup remote control. 10 ITV_Nafta.indd 10 2006-10-05 5:41:32 PM