Philips 32PF7321D User manual - Page 31
Perform installation, Multimedia browser
UPC - 609585111318
View all Philips 32PF7321D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English Française Perform installation (Please skip this section if you have no cable connected to the Antenna input of the TV.) & When the TV is powered-on for the first time you will be prompted to auto install the TV in order to receive the channels to receive the channels that are broadcasted locally. Note - The TV will take approximately 10-15 seconds to start up. é Select the desired Language and press the green button "Next". " Select Cable or Antenna in the Installation mode and press the green button "Next". ' Auto Installation may take 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider or broadcaster. ( When the TV is not receiving any signal from the antenna/cable, the message CHANNEL NOT AVAILABLE will appear on the TV screen. When no transmission is received from the broadcaster, a BLANK SCREEN will appear on the TV screen. Note - The TV will go on to standby after 10 minutes. Press the POWER button on the remote control to on the TV. § You will not be able to receive pay channels when using direct antenna/cable connection to the television. è When the Set-top box is connected to the television using coaxial cable, it is necessary to auto-program the television for the single channel (3 or 4) that the Set-top box outputs and change the channels at the Set-top Box (using the set-top remote control) to view the program. Refer to the manual for more details. Note - The newly installed channels maybe sorted in a deifferent sequence on this TV. Please key using the CH +/- buttons to get to know the new channel. Also you can use the OK key to see the list of channels. ! When the Set-top box is connected to the television using one of the AV connections (AV1/ AV2/ AV3/ HDMI), select that input source (using the AV+ button) to view the programs and change the channels at the Set-top Box (using the set-top box remote control) to view the program. Multimedia browser Multimedia browser lets you display pictures or play audio files stored on a USB device. The Multimedia browser application is invoked from the My Content menu (press the button) by selecting the USB device and pressing the cursor right. Notes: - Following file formats can be reproduced: • For pictures: JPEG • For audio: MP3, MP3 Pro - Only FAT/DOS-formatted memory devices are supported. - If your digital camera is not supported, make sure your camera is switched on and verify if its configuration settings are correct (see the manual of your camera). - Philips cannot be responsible if your USB device is not supported. Español 23