Philips 40PFL3706/F7 User Manual - Page 14

English Adjusting volume Still mode You can pause the image shown on the TV screen. Press FREEZE to pause the image shown on the TV screen. Freeze • The sound output will not be paused. • If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. • The still function will be released after 5 minutes. To cancel still mode, press any button except . (standby-On). Watching channels from a set-top box To watch channels from a set-top box 1 Switch on the set-top box. »» The picture from your set-top box might appear automatically on the TV screen. 2 Use the remote control of your set-top box to select channels. If the picture does not appear To increase or decrease volume • Press VOL + / − on the remote control or press VOLUME + / − on the side of the TV. To mute or unmute sound • Press MUTE on the remote control to mute the sound. • Press MUTE again or VOL + / − to recover the original sound. 1 Press SOURCE repeatedly to select the set-top box and wait a few seconds for the picture to appear. 2 Use the remote control of your set-top box to select channels. Watching connected devices To watch connected devices 1 Switch on the connected device. »» The picture from your connected device might appear automatically on the TV screen. 2 Use the remote control of the device to select channels. If the picture does not appear 1 Press SOURCE repeatedly to select the connected device and wait a few seconds for the picture to appear. 2 Use the remote control of the device to select channels. Automatic Power Shut Off If there is no input signal and no operation for 15 minutes, the unit will turn off automatically. EN 13