Philips 40PFL3706/F7 User Manual - Page 22

English EasyLink This function allows you to operate the linked functions between our brand devices with EasyLink capabilities and this unit connected via a HDMI cable. 1 Press MENU on the remote control and select [Features] > [EasyLink]. Picture Master EasyLink On Sound Auto Device Off On Setup Auto TV On On Features Device List Language USB 2 Press Î or ï to highlight the desired setting and press OK to select the setting. 3 Adjust the following items. [Master EasyLink] Set the EasyLink [On] or [Off]. The following additional settings will be grayed out when you set to [Off]. Press Î or ï to select the desired option, then press OK. On Select if you have connected an external device that is compatible with the EasyLink function. Off Disable all EasyLink function. [Auto Device Off] Press Î or ï to select the desired option, then press OK. On Your connected EasyLink device goes into standby mode automatically when you put this unit into standby mode. Off Your connected EasyLink device stays on even if unit goes into standby mode. [Auto TV On] Press Î or ï to select the desired option, then press OK. On This unit turns on automatically when you turn on your connected EasyLink device. Off This unit remains in standby mode even if you turn on your connected EasyLink device. [Device List] This function lets you see the product name of connected devices. 4 Press MENU to exit. ECO You can set whether the power consumption is saved or not. 1 Press MENU on the remote control and select [Features] > [ECO]. Picture Sound Setup Features Language USB Closed Caption Child Lock ECO PC Settings EasyLink Location Current Software Info  On Home  2 Press Î or ï to select the desired mode, then press OK. On Select if you want to reduce power consumption. Off Sets the backlight brighter. 3 Press MENU to exit. Set your location to home You can set the location of your TV to [Home] or [Retail]. Choosing [Home] gives you full flexibility to change predefined settings for picture and sound. 1 Press MENU on the remote control and select [Features] > [Location]. 2 Select [Home] and press OK to confirm your choice. 3 Press MENU to exit. Note •• You must set [Home]. Otherwise, personalized picture and sound settings will not be memorized after the unit goes to standby mode. EN 21