Philips 40PFL5705DV User manual - Page 15

6 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings then access other features. Access the home menu The home menu gives you easy access to connected devices, picture and sound settings as well as other useful features. 1 Press MENU on the remote control. Watch TV Browse USB Philips Wireless Media... Add new devices Setup 2 Use to select and navigate through one of the following menus. • [Watch TV] Switches back to the antenna source if another source is selected. • [Browse USB] Accesses USB menus. • [Philips Wireless MediaConnect] Accesses Philips Wireless MediaConnect. • [Net TV] Access [NETFLIX], [vTuner], [vudu] or [Twitter]. • [Add new devices] Adds new devices to the home menu. • [Setup] Accesses menus that allow you to change picture, sound and other TV settings. 3 Press OK to confirm your choice. 4 Press MENU to exit. Tip • After selecting [Add new devices], follow the on-screen instructions to select the correct device and connector. Lock or unlock your device from the home menu This section describes how to lock or unlock specified device. 1 Press MENU on the remote control. 2 Use to select a device to lock or unlock. 3 Press OPTIONS on the remote control. 4 Use Î / ï to select [Device lock] or [Device unlock], then press OK. 14 EN • If device lock is unlocked, [Device lock] will be displayed. If device lock is locked, [Device unlock] will be displayed. • When device lock is locked, will be displayed at the top right of the device icons. 5 Enter your PIN. (See 'Setting your PIN' on page 26.) • Once you have set PIN, PIN input menu does not appear after the unit is turned on. Enable or disable RC key forwarding from the home menu This section describes how to enable or disable RC key forwarding for a particular device. 1 Press MENU on the remote control. 2 Use to select a device to enable or disable RC key forwarding. 3 Press OPTIONS on the remote control. 4 Use Î/ï to select [Enable RC key forwarding] or [Disable RC key forwarding], then press OK. • If RC key forwarding is set to off, [Enable RC key forwarding] will be displayed. If RC key forwarding is set to on, [Disable RC key forwarding] will be displayed. • When you set RC key forwarding on, will be displayed at the top left of the device icons. Note • This function is available only when your devices are connected to this unit through HDMI cables and assigned to an HDMI port (HDMI1 to HDMI4) with [Add new devices] in the home menu. Philips Wireless MediaConnect You can enjoy your TV as a PC monitor wirelessly using your home network. Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below. 1 Launch Philips Wireless MediaConnect on your PC first. 2 Press MENU on the remote control. 3 Use to select [Philips Wireless MediaConnect]. • The start up screen for Philips Wireless MediaConnect will be displayed and the unit searches for available PC that is running Philips Wireless MediaConnect software. This TV is Wireless LAN Ready. With the USB wireless LAN adapter (supplied accessory: PH2010A) you can connect the TV to your network wirelessly. By starting Philips Wireless MediaConnect on your PC, you can stream the screen of your PC along with audio to your TV. To use Philips Wireless MediaConnect you need to connect the TV to your home network. Install Philips Wireless MediaConnect 1 Start your internet browser on your PC and open the Philips Wireless MediaConnect download page at www.philips.com/wifimediaconnect On the website, you can check the necessary PC system requirements. 2 Enter the 12 digit code printed on the cover of the User Manual or back of your TV. 3 Click the 'Download now' button to download the free Philips Wireless MediaConnect software. 4 Once downloaded, start the file 'Philips Wireless MediaConnect_ setup.exe'. Follow the instructions on screen.