Philips 42FD9954 User manual - Page 8

Sound M Volume V Bass - Treble + Sound mode J Setup º Language ‡ Power savings ) AV3 ( VGA2 § US English English Nederlands Deutsch Français Español 8 Use of the menus Sound menu Volume This control allows you to adjust the volume level of the sound from the speakers. Bass Bass attenuates or amplifies the low-frequency response of the sound from the loudspeakers. Treble Treble attenuates or amplifies the high-frequency response of the sound from the loudspeakers. Sound mode This control allows you to switch between mono and stereo sound. Note: Bass, Treble and Sound mode will not be available in VGA loop through mode, i.e. when a receiver box is connected to the monitor and a VGA source is selected. Setup menu Language & Use the cursor down to select Language. é Press the cursor right to enter the list of selectable languages. " Use the cursor up/down to scroll through the list and to bring up other languages which are not displayed on the screen at present. Note: Only with the US English language, the menu items will be displayed with additional icons. Power savings This control allows you to overrule the automatic power savings feature. In case Power savings is switched Off, the power always remains on until the monitor is forced to standby. & Use the cursor down to select Power savings. é Press the cursor left/right to select On or Off. AV3 This control allows you to set the AV3 input to HD-RGB,YCbCr or HDYPbPr.When having selected Auto, the monitor makes the selection automatically between YCbCr, HD-YPbPr or HD-RGB. See also p. 9, Equipment with Component Video Output connectors. & Use the cursor down to select AV3. é Press the cursor right to enter the list with options. " Press the cursor up/down to select one of the options. VGA2 This control allows you to select whether to set the VGA2 connector as input, output or even HD-input. & Use the cursor down to select VGA2. é Press the cursor right to enter the list with options: VGA IN, VGA OUT or HD IN. " Press the cursor up/down to select one of the options. Note: AV3 and VGA2 will not be available in VGA loop through mode, i.e. when a receiver box is connected to the monitor and a VGA source is selected.