Philips 50PFL5601 User manual - Page 33

50PFL5601 serial numbers beginning with DS1 and DS2 Language You can set the language for the on-screen display. 1 Use  to select Language, then press OK. Picture Sound Features Installation Language English Preferences Français Restore default settings Español 2 Use  to select English, Español or Français, then press OK. Note(s) • If you need the English menu instead of the Spanish or French menu's, press . Use  to select Configuración or Configuration, then press OK. Use    to select Ajustes de TV or Réglages de la télévision, then press OK. Use  to select Instalación or Installation, then press OK. Use  to select Idioma or Langue, then press OK. Use  to select English, then press OK. Press  to exit the Home menu. Preferences You can set the unit to reduce the power consumption or adjust the backlight brightness in Location setting. EasyLink allows you to operate your connected EasyLink device. Setting your location to home Choosing Home gives you full flexibility to change predefined settings for picture and sound. 1 Use  to select Preferences, then press OK. 2 Use  to select Location, then press OK. Language Location Preferences EasyLink Restore default settings HDMI mode TV placement Retail Demo Retail Home 33 .English HDMI mode If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try switching the HDMI mode following the instructions below. 1 Press  and use  to select Setup, then press OK. 2 Use    to select TV settings, then press OK. 3 Use  to select Installation, then press OK. 4 Use  to select Preferences, then press OK. 5 Use  to select HDMI mode, then press OK. 6 Use  to select HDMI1, HDMI2 or HDMI3, then press OK. 7 Use  to select Normal or Legacy (Compatibility) depending on the output capabilities of the external device, then press OK. • When switching the HDMI configuration (Legacy œ Normal), the screen will black out for a moment, then come back on. Note(s) • For HDMI 1, HDMI2, and HDMI3, Legacy (Compatibility) is the default setting. • The HDMI connector with HDMI mode set to Legacy (Compatibility) supports up to UHD 30P, while The HDMI connector with HDMI mode set to Normal supports up to UHD 60P. • Switching the HDMI mode between Normal and Legacy (Compatibility) may cause loss of HDMI CEC functionality in certain cases. TV placement To apply the best settings for your TV, select wall mount or stand mount. 1 Use  to select Preferences, then press OK. 2 Use  to select TV placement, then press OK. 3 Use  to select Wall mounted or On a TV stand, then press OK. Retail Demo When you set Location to Retail, E-sticker (Electronic Sticker) is displayed. E-sticker can be turned off using procedure below. 1 Use  to select Preferences, then press OK. 2 Use  to select Retail Demo, then press OK. 3 Use  to select Off, then press OK. 3 Use  to select Home, then press OK. Retail The unit will be set up with predefined settings for retail displays. In this setting, you can set the backlight brighter. Home The unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality selections according to your preference. Note(s) • You must set Home in the menu. Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. Continued on next page.