Philips 51PP9363H User manual - Page 10
Onnecting
View all Philips 51PP9363H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting Accessory Devices to Your TV CONNECTING A VCR AND CABLE BOX Presented here is a connection example involving a VCR and cable box. Refer to the VCR's directions-for-use manual for further information on connections. To make the connections in this example, you will need: • one, two-way signal splitter • two coaxial cables (75Ω) • one cable for a video connection (standard RCA-type phono plug) • two cables for audio connections (standard RCA-type phono plugs) (only one cable is needed for connection to a nonstereo VCR). NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039. ANTENNA IN 75Ω 3 Back of TV 5 INPUT-AV 1 VIDEO S-VIDEO L L AUDIO R OUTPUT Y Pb Pr DVI 6 INPUT-AV 2 VIDEO S-VIDEO L L AUDIO R HD INPUT-AV 5 HD INPUT-AV 4 G/Y R/Pr B/Pb V L SYNC AUDIO H R L AUDIO R 4 AUDIO L OUT IN R VIDEO ANT IN OUT OUT IN CH3 CH4 1 Connect a cable TV signal to a twoway signal splitter. 2 Connect one of the two-way signal splitter outputs to the CABLE IN jack on the cable box. Back of VCR (example only) AV2 3 Connect the other two-way signal splitter output to the ANTENNA IN 75Ω on the back of the TV. 4 Connect from the cable box TO TV jack to the ANT IN jack on the back of the VCR. 5 Connect the VIDEO OUT jack on the VCR to the INPUT-AV 2 VIDEO POWER jack on the back of the TV. 6 Connect the AUDIO OUT R(ight) and L(eft) jacks on the VCR to INPUT-AV 2 AUDIO jacks on the back of the TV. NOTE: If the VCR is a nonstereo unit, connect only the left audio cable, which usually has a white-coded plug. TV SWAP VCR PIP CH ACC ACTIVE CONTROL FREEZE DN UP SOUND PICTURE STATUS/ EXIT MENU/ SELECT 7 Press the AV button on the remote control as many times as necessary to select the AV2 source for viewing of materials from the cable box or VCR. MUTE VOL CH 123 456 7 789 TV/VCR A/CH 0 SURF SURF PIP ON/OFF REC • FORMAT SLEEP SAP AV DOLBY V PROG.LIST ITR/ HOME HOME PERSONAL 10 Signal Splitter CABLE IN TO TV OUTPUT CH 3 4 1 Cable TV Signal 2 Back of Cable Box (example only) HELPFUL HINT • The RF output on a cable box, usually labeled "OUTPUT," "OUT," or "TO TV," will not pass a stereo sound signal to the ANTENNA IN 75Ω jack on the TV. If, however, your cable box has separate Audio/Video outputs, using A/V cables to connect to those outputs and to the A/V inputs on the TV might pass a stereo sound signal to the TV. Contact your cable TV company for more information. • To simplify making connections, the plugs on audio and video cables are often color coded. The jacks on your TV are likewise color coded to match the plugs. The coding is as follows: -Yellow for video (composite) -Red for the right audio channel -White for the left audio channel NOTE: If your VCR is mono (nonstereo), you will connect only one audio cable. You must ensure that the TV is set to MONO for the signal source to which you've connected the VCR (INPUT-AV 2, INPUT-AV 1, or the side panel inputs [AV3]). Otherwise, you will receive sound from only one of the TV's speakers. See page 36.