Philips 55PP9910 User manual - Page 19

17 ADVANCED MENU FEATURES SETTING THE TIMER START/STOP TIME You can set the Timer to switch to a selected channel at a specific time while you are watching another channel, or when the TV is in standby mode. You can also set the TV to turn off at some time after the TV switches channels. PICTURE SOUND FEATURES INSTALL INTELLITUNE SMART PICTURE SLEEP TIMER Auto Lock FEATURES INTELLITUNE SMART PICTURE SLEEP TIMER Auto Lock TIME START TIME STOP TIME CHANNEL ACTIVATE 1 Press the MENU button on the remote control to show the onscreen menu. 9 2 Press the CURSOR DOWN button twice to highlight FEATURES. 7 FEATURES TIMER TIME START TIME 1 STOP TIME CHANNEL ACTIVATE 8:06 PM Press the CURSOR RIGHT button to enter the FEA- 3 8 TURES submenu. Then press 2 the CUROSR DOWN button until TIMER is highlighted. 3,4, 5 FEATURES TIMER TIME START TIME STOP TIME CHANNEL ACTIVATE _ _:_ _ 4 Press the CURSOR RIGHT button again. Then press the CURSOR DOWN button once to highlight the START TIME control. 5 Press the CURSOR RIGHT button to highlight the time indicator area. 6 FEATURES TIMER TIME START TIME STOP TIME CHANNEL ACTIVATE _ _:_ _ 6 Press the NUMBER buttons to enter the correct time. If you make a mistake entering the time, use the CURSOR LEFT or RIGHT button to move among the time input slots to make corrections. NOTE: You can also use the CURSOR BUTTON UP or DOWN to cycle through digits to input the time. 7 Press the CURSOR UP or DOWN button to select AM or PM. 8 Press the CURSOR LEFT button repeatedly until START TIME is highlighted. Then press the CURSOR DOWN button to highlight STOP TIME. If you want the TV to switch off at some time after the changing of channels, follow steps 5-7 above to set the STOP TIME. 9 Press the INFO/EXIT button to exit the menu. See the next two panels for instructions on selecting the Timer's channel and activating the timer.