Philips 55PP9910 User manual - Page 23

21 ADVANCED MENU FEATURES SETTING UP THE AUTOLOCK™ ACCESS CODE Your AutoLock™ access code allows you to enter the AutoLock™ submenus to set up or turn off blocking. Your access code is also the "key" that unlocks programs or channels that are being blocked by AutoLock™. PICTURE SOUND FEATURES INSTALL TIMER AutoLock PIP CLOSED CAP FORMAT FEATURES TIMER AutoLock PIP SOURCE CLOSED CAP CAP OPTIONS TIME START TIME STOP TIME CHANNEL ACTIVATE 1 Press the MENU button on the remote control to show the onscreen menu. 8 2 Press the CURSOR DOWN button twice to highlight FEATURES. FEATURES TIMER 1 AutoLock PIP CLOSED CAP CAP OPTIONS 3 Press the CURSOR RIGHT button. Then press the CURSOR DOWN button once to highlight the AutoLock control. 4 Press the CURSOR RIGHT button to activate the AutoLock menu. 5 Press 0,0,0,0 on the remote control. The AutoLock menu will appear. 6 Press the CURSOR DOWN button three times, then the CURSOR RIGHT button to open the New Code screen. 7 Enter your new four-digit code twice. 8 Press the INFO/EXIT button exit the menu. 9 Use these steps to reset your code if you lose it. Instead of 0000 in step 5, use 0711. This is the reset code. Record your personal code below: 2, 6 Autolock 3,4 Enter access code: 5, 7 Autolock Set blocking Block channel Block by rating Setup Code ˙ ¸ Autolock Enter new access code: ** ** Please re-enter new access code: * ** HELPFUL HINTS • If you discover that your access code has been changed, you can assume that blocked channels may have been viewed. • For the AutoLock to work with digital channels, the AutoChron must be set. See panel 29.