Philips 655 User Guide - Page 7

Important - mobile phone

Page 7 highlights

1 Important Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone. 1.1 Power requirements • This product requires an electrical supply of 100-240 volts AC. In case of power failure, communication can be lost. • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Warning To avoid damage or malfunction: • Do not allow the charging contacts or the battery to come into contact with metal objects. • Do not open your product as you could be exposed to high voltages. • Do not allow the charger to come into contact with liquids. • Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion. • Always use the cables provided with the product. • Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear. • This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. • Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. • Do not drop your phone or allow objects to fall on your phone. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set. • Do not use the product in places where there are explosive hazards. • Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product. • Active mobile phones in the vicinity may cause interference. • Use only with provided batteries. • Rechargeable batteries information Ni-MH battery, AAA × 2, 1.2V, 600mAh • Use only with provided power supply. • Power supply information for base station Input: AC100-240V/0.3A, 50Hz/60Hz Output: DC6V/0.5A JOD-SWR-07342 JODEN Impor tant 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

5
Important
1
Important
Take time to read this user manual
before you use your phone. It contains
important information and notes
regarding your phone.
1.1
Power requirements
This product requires an electrical
supply of 100-240 volts AC. In case of
power failure, communication can be
lost.
The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical
outlet is always easily accessible.
The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
EN 60-950.
To avoid damage or malfunction:
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
Do not open your product as you
could be exposed to high voltages.
Do not allow the charger to come
into contact with liquids.
Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
Always use the cables provided with
the product.
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the
power fails. An alternative has to be
made available to allow emergency
calls.
Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This
can deteriorate audio quality and
damage the product.
Active mobile phones in the vicinity
may cause interference.
Use only with provided batteries.
Rechargeable batteries information
Ni-MH battery, AAA × 2, 1.2V,
600mAh
Use only with provided power supply.
Power supply information for base
station
Input: AC100-240V/0.3A, 50Hz/60Hz
Output: DC6V/0.5A
JOD-SWR-07342
JODEN
Warning