Philips 65PFL5704 User manual - Page 51
Installing the stands, In the same manner as step 2
View all Philips 65PFL5704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the stands 1 Remove both of the bottom polystyrene foam bases. Carefully tear the plastic bag until the bottom corner of the TV is exposed. ● Support the top of the TV set at all times to prevent the TV from falling. 10 .English 5 Fasten the other stand to the TV with 2 screws (included). 2 screws required 6 Both stands should now be securely fastened. Caution(s) ● Before installing the matching stand, remove the protective cardboard and carefully peel away the film from the area so that it will not get stuck between the unit and the stand. 2 Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the matching stand upward until it fits the main unit. 65PFL5704 or 65PFL5604 3 Fasten the matching stand to the TV with 2 screws (included). Note(s) ● A wide open space is recommended for assembly. ● A Phillips-head screwdriver is required to fasten the stands to the TV set. ● When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. ● To remove the stand from this unit, unscrew the phillips-head screws by reversing the procedure. Be careful not to drop the stand when you remove it. 2 screws required 4 In the same manner as step 2, install the other stand. Continued on next page.