Philips AC1214 User manual - Page 18
Storage
View all Philips AC1214 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Filter reset You can replace filters even if there is no filter replacement code displayed on the screen. After replacing a filter, you need to reset the filter lifetime counter manually. 1 Touch and simultaneously for 3 seconds to enter the filter reset mode (fig.{). »» Code (A3) of the NanoProtect True HEPA filter displays on the screen. 2 Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect True HEPA filter (fig.z). 3 Code (C7) of the Nanoprotect Active Carbon filter displays on the screen after the lifetime counter of the NanoProtect True HEPA filter has been reset (fig.|). 4 Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect Active Carbon filter and exit the filter reset mode (fig.}). 7 Storage 1 Turn off the air purifier and unplug from the wall outlet. 2 Clean the air purifier, air quality sensor and pre-filter (see chapter 'Cleaning'). 3 Let all parts dry thoroughly before storing. 4 Wrap the filter and pre-filter separately in air tight plastic bags. 5 Store the air purifier, the filter and pre-filter in a cool, dry location. 6 Always thoroughly wash hands after handling filters. 16 EN