Philips AC1214 User manual - Page 8
sensor and pre-filter see
![]() |
View all Philips AC1214 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
• Make sure the air purifier is assembled/connected properly after cleaning the air quality sensor and pre-filter or replacing the filters. • If the air purifier will not be used for a long period of time, unplug from the electrical outlet, clean the appliance, air quality sensor and pre-filter (see 'Cleaning') before storing. • Make sure that you plug the appliance into a properly connected electrical outlet. • Always place and use the appliance on a dry, stable, level, and horizontal surface. Make sure the air purifier cannot be easily knocked over by a person or object. • Leave at least 20cm/8in free space behind and on both sides of the appliance and leave at least 30cm/12in free space above the appliance. • Do not place anything on top of the appliance. 6 EN • Do not sit, stand or place heavy objects on the air purifier. • Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance. • Make sure all filters are properly installed before you switch on the appliance. • Only use the original Philips filters specially intended for this appliance. Do not use any other filters. • Do not use the filter as fuel or for similar purposes. • Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects. • Always lift or move the appliance by the handle on back side of the appliance. • NEVER tilt, move or attempt to change or replace a filter while the air purifier is operating. Switch OFF and unplug
![](/manual_guide/products/phillips-ac1214-user-manual-677cb18/8.png)