Philips AC2889 User manual - Page 8

3 Getting started Installing the filters Note • Make sure the air purifier is unplugged from the electrical outlet before installing the filters. • Make sure the side of the filter with the tag is pointing towards you. 1 Pull the bottom part of the front panel to remove it from the air purifier (fig. c). 2 Press the two clips down (1) and pull the pre-filter towards you (2) (fig. d). 3 Remove all filters (fig. e). 4 Remove all packaging materials from the filters (fig. f). 5 Place the thick filter (FY2422) into the air purifier and then the thin AC filter (FY2420) (fig. g). The model numbers are shown on each filter. 6 Attach the pre-filter back into the air purifier (fig. h). Note • Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier. 7 Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig. i). 8 Wash your hands thoroughly after installing filters. Setting up the Wi-Fi connection for the first time Setting up the Wi-Fi connection for the first time 1 Download and install the Philips "Clean Home+" app from the App Store or Google Play. 2 Put the plug of the air purifier in the power socket and touch to turn on the air purifier. »» The Wi-Fi indicator blinks orange for the first time. 3 Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network. 4 Launch the "Clean Home+" app and click on "Connect a New Device" or press the "+" button on the top of the screen. Follow the onscreen instructions to connect the air purifier to your network. 5 After the successful pairing and connection, the Wi-Fi indicator will light up white. If pairing is not successful, consult the troubleshooting section, or the help section in the "Clean Home+" app for extensive and up-to-date troubleshooting tips. 6 EN