Philips AS140 User manual - Page 24

English 6 Other features Set time 1 Press to switch the docking system to standby mode. 2 Press and hold SET TIME for two seconds. » The hour and minute digits begin to blink. 3 Press / and / repeatedly to set the hour and minute. 4 Press SET TIME » [12H] or [24H] begins to blink. 5 Press / to select 12/24 hour format. 6 Press SET TIME » The set time is displayed. Set alarm timer Set alarm In standby mode, you can set two alarms to ring at different time. Note Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for two seconds to activate alarm setting mode. » The hour and minute digits begin to blink. 2 Press / and / the hour and minute. 3 Press AL1/AL2 repeatedly to set Select alarm source Note For alarm sound, you can select buzzer, your last listened radio chanel, or the latest played track in your Android-powered device. Adjust AL1/AL2 RADIO·BUZZ·DOCK control to select alarm source for both alarms. Note If DOCK is selected as alarm source, make sure that you have docked your device into the docking system. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » The alarm icon appears if alarm timer is on and disappears if it is off. To stop the ringing alarm, press the corresponding AL1/AL2. » The alarm repeats ringing for the next day. Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. Set sleep timer This docking system can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears. EN 23