Philips AT9230 User manual - Page 24
Alarm activation/deactivation
View all Philips AT9230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English ALARM CLOCK Alarm activation/deactivation At the set alarm time either the tuner will start playing for 1 hour, the beeper will come on for 3 minutes or an entire CD will be played. 1 Keep SET· pressed for approximately 2 seconds, then briefly press SET· twice. y Either ALbEEP, ALCd or ALtun is displayed. 2 Press 3 or 4 if necessary repeatedly within 5 seconds to select the desired alarm signal until the display shows either: ALbEEP: the beeper will be the alarm signal, ALCd: the CD will be the alarm signal, or ALtun: the tuner will be the alarm signal. y At the set time, starts flashing and the selected alarm signal will come on. • You can deactivate the beeper for 24 hours by pressing any key on the player. • If you deactivate the alarm function by switching off CD or tuner play with 9, CD or tuner play will restart after 24 hours. • To switch the alarm function on or off, keep ESP pressed for approximately 2 seconds. y is shown if the alarm function is on. Notes: - If there is no CD inserted or no radio station tuned, the beeper will be the alarm signal instead. - The alarm can only be heard if you disconnect the headphones, and either connect speakers to the player, or select the beeper as the alarm signal. 24