Philips AT9230 User manual - Page 26
Troubleshooting
View all Philips AT9230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English TROUBLESHOOTING WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Problem Possible cause Solution No power, playback does not start Batteries Batteries inserted incorrectly Insert the batteries correctly. Batteries are empty. Change the batteries. Contact pins are dirty. Clean them with a cloth. Power adapter Loose connection Connect the adapter securely. In-car use Cigarette lighter is not powered Switch on ignition or insert when ignition is off. batteries. nF dISC indication CD-RW (CD-R) is not recorded properly. Use FINALIZE on the CD recorder to complete the recording. no dISC indication The CD is badly scratched or dirty. Replace or clean the CD. CD is not or incorrectly inserted. Insert a CD, label upwards. The laser lens is steamed up. Wait until the lens has cleared. HoLd indication HOLD is activated. and/or no reaction Electrostatic discharge to controls Deactivate HOLD. Disconnect the set from the power supply or take out the batteries for a few seconds. The CD skips tracks. The CD is damaged or dirty. Replace or clean the CD. RESUME, SHUFFLE or PROGRAM is Switch RESUME, SHUFFLE active. or PROGRAM off. 26