Philips AZ1574 User manual - Page 15

English CD PLAYER CASSETTE RECORDER • To take a CD out of its box, press the center spindle while lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust. • To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. • Never write on a CD or attach any stickers to it. Cassette playback 1. Select TAPE source. ™ The display shows TAPE throughout tape operation. 2. Press OPEN•STOP / 9 to open the cassette door. 3. Insert a recorded cassette and close the cassette door. 4. Press PLAY 1 to start playback. 5. To interrupt playback press PAUSE ;. To resume, press this button again. 6. By pressing SEARCH 5 or 6 on the set fast forwarding of the tape is possible in both directions. 7. To stop the tape, press OPEN•STOP / 9. • The buttons are automatically released at the end of the tape, except if PAUSE ; has been activated. STOP PLAY•PAUSE CCDD SRYENWCRROITSATRBALTERCECOOMRPDAINTGIBLE AZ 1564 CD RADIO CASSETTE RECORDER OPEN CLOSE PROG BAT LOW FM A SOUND CONTROL P CENTER T GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or other rights of third parties are not infringed. • This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use only NORMAL type cassettes (IEC I) on which the tabs have not been broken. • The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND or DBB controls will not affect the recording in progress. • At the very beginning and end of the tape, no recording will take place during the 7 seconds, when the leader tape passes the recorder heads. • To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. To record over this side again, cover the tabs with a piece of adhesive tape. Synchro Start CD recording 1. Select CD source. 2. Insert a CD and if desired, program track numbers. 3. Press OPEN•STOP / 9 to open the cassette compartment. 4. Insert a suitable tape into the cassette deck and close the cassette door. 15