Philips AZ2780 User manual - Page 11

English AZ 2765 /17 page 11 DIGITAL TUNER TUNING TO RADIO STATIONS 1. Press POWER to on position. 2. Press TUNER source button. - The TUNER indicator lights up. 3. Press BAND once or more to select the desired FM/ AM waveband. 4. To tune to a radio station press SEARCH ¡ or ™ for more than 1 second and release when the frequency in the display starts to change. B - The radio automatically tunes to a station with sufficient reception. Display shows Srch during automatic tuning. 5. Repeat step 4 until you find the desired station. - To tune to a weak station, press SEARCH ¡ or ™ briefly and repeatedly until the correct frequency is shown. To improve radio reception - For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter). - For AM, the set is provided with a built-in antenna so the telescopic antenna is not needed. Direct the antenna by turning the whole set. 6. Adjust the sound using VOLUME and DBB. 7. Press POWER to off position to switch off the set. - The TUNER indicator goes out. Programming radio stations You can store up to a total of 29 radio stations in the memory. 1. Tune to your desired station (see Tuning to radio stations). 2. Press PROG to activate programming. - Display: PROGRAM flashes. 3. Press PRESET 4 or 3 once or more to allocate a number from 1 to 29 to this station. 4. Press PROG again to confirm the setting. - Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown. 5. Repeat the above four steps to store other stations. - You can overwrite a preset station by storing another frequency in its place Tuning to preset stations Press PRESET 4 or 3 once or more until the desired preset number appears in the display. POWER DBB AZ2765 CD RADIO CASSETTE RECORDE SHUFFLE CD TUNER SHUFFLE CD REPEAT STOP TUNER SEARCH TAPE PROG PLAY/PAUSE DIGITAL TUNER BAND PROGRAM TUNER FM 11