Philips CD3653Q User manual - Page 31

English Manage the area code Note •• This feature only applies to models with area code support. You can define an area code (up to 5 digits). This area code is automatically removed from an incoming call if it matches with the code you define.Then the phone number is saved in the call log without an area code. Activate/Deactivate auto removal of area code 1 Press menu. 2 Select [ADVANCED SET] > [AREA CODE], then press [OK] to confirm. 3 Enter the area code, then press [OK] to confirm. »» The setting is saved. Auto prefix This feature checks and formats your outgoing call number before it is dialed out.The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out. Note •• The maximum length of a detect number is 5 digits. The maximum length of an auto prefix number is 10 digits. 1 Press menu. 2 Select [ADVANCED SET] > [AUTO PREFIX], then press [OK] to confirm. 3 Enter the detect number, then press [OK] to confirm. 4 Enter the prefix number, then press [OK] to confirm. »» The setting is saved. Note •• To enter a pause, press and hold . Note •• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls. Note •• The feature is unavailable if the dialed number starts with * and #. First ring If you have subscribed for caller ID service with your service provider, your phone can suppress the first ring before the caller ID displays on the screen. After the phone is reset, it can detect automatically if the caller ID service is subscribed and start to suppress the first ring.You can change this setting to suit your preference.This feature only applies to models with first ring support. Turn the first ring on/off 1 Press menu. 2 Select [ADVANCED SET] > [FIRST RING], then press [OK] to confirm. 3 Select [ON]/[OFF], press [OK] to confirm. »» The setting is saved. Note •• To reset the first ring status, go to the reset menu. (see 'Restore default settings' on page 34) EN 31