Philips CD3653Q User manual - Page 34

13 Advanced settings Register the handsets You can register additional handsets to the base station.The base station can register up to 5 handsets. Auto registration 1 Place the handset on the base station. »» The handset detects the base station and start to register automatically. »» Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset. Manual registration If auto registration fails, register your handset manually to the base station. 1 Press menu on the handset. 2 Select [ADVANCED SET] > [REGISTER], then press [OK] to confirm. 3 Press and hold handset locator on the base station for 5 seconds until you hear a confirmation beep. »» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset. 3 Select [ADVANCED SET] > [UNREGISTER], then press [OK] to confirm. 4 Select the handset number to be unregistered. 5 Press [OK] to confirm. »» The handset is unregistered. Tip •• The handset number displays beside the handset name in standby mode. Restore default settings You can reset your phone settings to the original factory settings. 1 Press menu. 2 Select [ADVANCED SET] > [RESET], then press [OK] to confirm. »» The handset displays a confirmation request. 3 Press [OK] to confirm. »» All settings are reset. »» The welcome screen displays. Tip •• For more information about the default settings, see the section on Default settings. Unregister the handsets 1 If two handsets share the same base stations, you can unregister a handset with another handset. 2 Press menu. 34 EN