Philips CSS5530B User manual - Page 13

Set up speaker distance Wireless connection causes audio delay latency. Set up the speaker distance to synchronize audio output among the front speakers, rear speakers and subwoofer. 1 Press DELAY to enter setup mode. »» The display panel scrolls DELAY ADJ (delay adjustment). • To exit setup mode, press EXIT SETTINGS, or 3 seconds of button inactivity occurs. 2 Press DELAY again to select a speaker for distance adjustment. 3 Press Volume +/- to adjust distance for the selected speaker. • To exit setup mode without save, press EXIT SETTINGS, or 3 seconds of button inactivity occurs. 4 Repeat step 2 and 3 to set up the distance for other speakers. 5 After the setup is complete, press EXIT SETTINGS to exit. »» The value is saved and applied. Set up speaker volume Set up the speaker volume for optimal surround sound. 1 Press VOL to enter setup mode. »» The display panel scrolls SPKR VOL (speaker volume). • To exit setup mode, press EXIT SETTINGS, or 3 seconds of button inactivity occurs. 2 Press VOL again to play test tone from the speakers. 3 Then press VOL to select a speaker for volume adjustment. 4 Press Volume +/- to adjust volume for the selected speaker. • To exit setup mode without save, press EXIT SETTINGS, or 3 seconds of button inactivity occurs. 5 Repeat step 3 and 4 to set up the volume for other speakers. 6 After the setup is complete, press EXIT SETTINGS to exit. »» The value is saved and applied. EN 11