Philips CSS5530B User manual - Page 17

5 Update software To get the best features and support, update your product with the latest software. Check software version In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence within three seconds. »» The software version number is displayed on the display panel. Update software via USB Caution •• Do not turn off the power or remove the USB flash drive when the software update is in progress because you might damage this product. 1 Check the latest software version on www.philips.com/suppor t. • Search for your model and click on "Software and drivers". 2 Download the software into a USB flash drive. a Unzip the download if zipped, and make sure that the unzipped file contains two files: "CSS5530.bin" and "RPT5530.bin". b Put the two files ( "CSS5530.bin" and "RPT5530.bin") in the root directory of the USB flash drive. 3 Connect the USB flash drive to the USB connector on this product. 4 Switch this product to HDMI ARC source (press HDMI ARC). 5 On the remote control, within 6 seconds press twice then Volume + once, and then hold down SOUND. »» Then "UPG" (upgrade) blinks on the display panel. »» If a USB flash drive is not connected or invalid upgrade file is found, "ERROR" (error) is displayed on the display panel. 6 Press on the remote control to start the upgrade. 7 Wait until the upgrade is completed. »» If the upgrade is complete, this product automatically turns off and on again. Note •• The upgrade time may take around 3 minutes. EN 15