Philips DC350 User manual - Page 20

English Connect with a Bluetooth device Note • The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet). • Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. • Compatibility with all Bluetooth devices is not guaranteed. • Any obstacle between this unit and a Bluetooth device can reduce the operational range. • Keep this unit away from any other electronic device that may cause interference. Connect a device for the first time Tip • This unit can memorize the connection information of up to 8 devices. 1 Press BLUETOOTH to select the Bluetooth source. 2 For an iPhone, load it in the dock for automatic re-connection setup. 3 Press and hold PAIRING for more than 3 seconds. » The Bluetooth indicator blinks. 4 On the device, set up the Bluetooth connection: a Enable Bluetooth to search for other Bluetooth devices. (Refer to the device user manual on how to enable the function.) b When " PHILIPS DC350" is recognized and displayed, select it to start to connect. c When prompted for a password, enter "0000". 5 Wait until the Bluetooth indicator turns on. » The connection is complete. To connect more Bluetooth devices 1 Disconnect the currently-connected device. (see 'Disconnect a device' on page 22) 2 Repeat the steps 1-5 in "Connect a device". Tip • If no connection is made within one minute, [FAILED] (failed) is displayed on the main unit. EN 21