Philips DC350 User manual - Page 21

Disconnect a device 1 Press and hold for more than 5 seconds • To disconnect, you can also turn off the connected device or move it beyond the communication range. • The Bluetooth indicator turns off. Re-connect a previously-connected device Tip • For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this unit, it re-connects automatically. 1 Turn on the main unit. 2 On the device, set up the Bluetooth connection: a Enable Bluetooth to search for other Bluetooth devices. (Refer to the device user manual on how to enable the function.) b When " PHILIPS DC350" is recognized and displayed, select it to start to connect. 3 Wait until the Bluetooth indicator turns on. » Re-connection is completed. Receive a phone call Note • You can receive phone calls through this unit with devices that support the HFP or HSP profile. 1 Connect the Bluetooth device. (see 'Connect with a Bluetooth device' on page 21) 2 When a call is received, you hear the incoming call alert tone. Press PAIRING to accept the call. • To reject the call, press . 3 Speak into the MIC located on the front panel. • To increase or decrease the volume, press VOL +/-. • To mute the microphone, press MUTE.To unmute, press this button again. • To select to hear the audio from the device or from the main unit, press PAIRING . 4 Press to end the call. 22 EN