Philips DCM276 User manual - Page 17
Other features
UPC - 609585175600
View all Philips DCM276 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English 7 Other features Set the alarm timer This unit can be used as an alarm clock.The disc/radio/USB/iPod is activated to play at a preset time. Note Ensure that you have set the clock correctly. 1 Press to switch to standby mode. 2 Press and hold SLEEP/TIMER for more than two seconds. » A prompt to select the source is displayed. 3 Press CD, TUNER, USB or iPod to select a source. 4 Press SLEEP/TIMERWRFRQÀUP » The clock digits are displayed. » The hour digits begin to blink. 5 Press / to set the hour. 6 Press SLEEP/TIMERWRFRQÀUP » The minute digits begin to blink. 7 Press / to set the minute. » The timer is set and activated. » is displayed. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, is displayed. To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. » When sleep timer is deactivated, disappears on the display. Play from an external device You can also listen to an external audio device through this unit. 1 Press USB/MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to: the MP3 LINK jack (3.5mm) on the unit. the headphone jack on an external device. 3 Start to play the device (see the device user manual). EN 17