Philips DVD701AT User manual - Page 15

Connecting to optional equipment DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS 1 1 COAXIAL 2 2 R L AUDIO CVBS VIDEO OUT RECEIVER DIGITAL AUDIO IN MAINS Y/C S-VIDEO OUT Connecting to an amplifier equipped with digital stereo q For multi-channel sound, your player provides both digital and analog audio outputs. DIGITAL AUDIO CABLE (optional) Connecting to an A/V receiver equipped with a multichannel decoder (Dolby Digital™ (AC-3) , MPEG 2 and DTS) Digital Multi-channel sound Digital multi-channel connection provides the best sound quality. For this you need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital™(AC-3) and DTS). Check the receiver manual and the logos on the front of the receiver. 1 Connect the player's digital audio or digital coaxial output to the corresponding input on the receiver using the optional digital audio cable.(not supplied) In this case, do not use the player's audio Left and Right outputs. 2 You will need to activate the digital output of the player (See Settings). 3 The audio format of the digital output is dependent on the audio format of the selected audio stream. Make sure that the selected audio stream matches the capabilities of the receiver connected to the digital output. Connecting to an amplifier equipped with Dolby Surround™ 1 If your TV set has a Dolby Pro Logic™ decoder, you simply hook up the player to the TV using the S-Video, or Video (CVBS) and audio connections. 2 If not, you need to make the S-Video, or Video (CVBS) connection to the TV, and connect the player's audio Left and Right outputs to the corresponding inputs on a Dolby Pro Logic™ Audio/Video receiver, using the cable supplied. 3 For speaker connections, follow the instructions given in the TV set or A/V receiver user manual. NOTE If the audio format of the digital output does not match the capabilities of your receiver, the sound will be muted. PREPARATION 15