Philips DVD724CA User manual - Page 38
SPDIF, LPCM 96K Setup
View all Philips DVD724CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 SPDIF, LPCM 96K Setup SPDIF Setup SPDIF is the Sony Philips Digital Interface, or a method of transferring digital audio. If you connected the DVD Player to a Stereo using the OPTICAL or COAXIAL jack as shown on page 14, you need to adjust the SPDIF OUT setting as described below. If you are not using the OPTICAL or COAXIAL jack, no adjustment is necessary. 1 Press SYSTEM MENU. Press 4 repeatedly to select SPDIF SETUP, then press OK. 23 SPDIF OUT will be selected. Press 2. 4 Press 3 or 4 to select RAW or PCM, then press OK. Choose RAW to select the original default audio settings as received by most Stereos. However, if the sound is distorted, your Stereo may need to receive audio in the PCM (pulse code modulation) format. Choose PCM if your Stereo is PCM-compatible. Refer to your Stereo owner's manual for details. - - SPDIF SETUP - - SPDIF OUT F RAW LPCM 96K PCM MAIN PAGE 1,5 2-4 5 RAW DATA VIA SPDIF Press SYSTEM MENU to remove the menus. LPCM 96K Setup If you connected the DVD Player to a Stereo using the OPTICAL or COAXIAL jack as shown on page 14, you may need to adjust the LPCM 96K setting. Discs are recorded in a certain sampling rate. (The higher the sampling rate, the better the sound quality.) Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM 96K to ON if you want the DVD Player to detect the sampling rate of Discs during playback and automatically choose the best sound available. 1 Press SYSTEM MENU. Press 4 repeatedly to select SPDIF SETUP, then press OK. 23 Press 4 to select LPCM 96K, then press 2. 4 Press 3 or 4 to select OFF or ON, then press OK. - - SPDIF SETUP - - SPDIF OUT LPCM 96K F MAIN PAGE OFF ON 5 SET LPCM OUTPUT AS 96K Press SYSTEM MENU to remove the menus. 1,5 2-4