Philips DVD727 User manual - Page 15
Connecting to a TV and a Stereo, Stereo has Dolby Digital, or MPEG2
View all Philips DVD727 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Hookups (cont'd) 15 Connecting to a TV and a Stereo (Stereo has Dolby DigitalTM or MPEG2) 1 Stereo (example only) Back of TV (example only) VIDEO IN COAXIAL DIGITAL AUDIO IN VIDEO IN 2 3 1 Connect the Player's COAXIAL jack or OPTICAL jack to the Stereo's COAXIAL DIGITAL AUDIO IN jack or OPTICAL DIGITAL AUDIO IN jack. You only need to use one of the jacks, not both. Use an appropriate digital audio cable (not supplied). See your electronics retailer for details and availability. 2 Connect the supplied video cable to the Player's yellow VIDEO (VIDEO OUT) jack and to the TV's VIDEO IN jack. The supplied video cable has yellow markings. 3 Plug the power cords of the DVD Player, Stereo, and the TV into an active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on. 4 Turn on the Stereo and set it to the correct Audio In channel or sound source. Refer to the Stereo owner's manual for details. 5 Turn on the TV. Set it to the correct Video In channel. See your TV owner's manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the DVD screen on the TV. Helpful Hints • Set DIGITAL OUTPUT accordingly. Details are on page 40. • Your Stereo must support MPEG2 or Dolby DigitalTM. Check the Stereo's manual. • If you prefer or need to use the S-VIDEO or Y Pb Pr jacks instead, see pages 12-13.