Philips DVD727 User manual - Page 40
Digital Output, LPCM Output
View all Philips DVD727 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 Digital Output, LPCM Output Digital Output If you connected the Player to a Stereo using the COAXIAL jack as shown on page 15, adjust DIGITAL OUTPUT (audio) as described below. If you are not using the COAXIAL jack, no adjustment is necessary. 1 Press SYSTEM MENU. 2 Press 4 to select DIGITAL AUDIO SETUP, then press OK. 3 DIGITAL OUTPUT will be selected. Press 2. 4 2-4 Press 3 or 4 to select ALL or PCM only, then press OK. Choose ALL to select the original default audio settings as received by most Stereos. If the sound is distorted, your Stereo may need to receive audio in the PCM format (pulse code modulation, contains only left and right audio signals). Choose PCM only if your Stereo is PCM-compatible or cannot decode MPEG-2 or DTS audio. Refer to your Stereo owner's manual for details. - - DIGITAL AUDIO SETUP PAGE - - DIGITAL OUTPUT F ALL LPCM OUTPUT PCM only MAIN PAGE 5 Press SYSTEM MENU to remove the menus. LPCM Output If you connected the Player to a Stereo using the COAXIAL or OPTICAL jack as shown on page 15, adjust LPCM OUTPUT. Discs are recorded in a certain sampling rate. The higher the sampling rate, the better the sound quality. Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM OUTPUT to 96K if you are playing Discs recorded at this high rate. Otherwise, set LPCM OUTPUT to 48K. 1 Press SYSTEM MENU. 2 Press 4 to select DIGITAL AUDIO SETUP, then press OK. 3 Press 4 to select LPCM OUTPUT, then press 2. 2-4 4 Press 3 or 4 to select 48K or 96K, then press OK. - - DIGITAL AUDIO SETUP PAGE - - DIGITAL OUTPUT LPCM OUTPUT F 48K 96K MAIN PAGE 5 Press SYSTEM MENU to remove the menus. 1,5 1,5