Philips DVD950AT98 User manual - Page 16

Preparation TV CB A DIGITAL AUDIO OUT PCM/MPEG2/AC3 SURROUND CENTRE FRONT L OPTICAL R SURROUND SUB WF FRONT COAXIAL MULTICHANNEL AUDIO OUT L 1 R 2 AUDIO OUT CVBS S-VIDEO CR CB Y VIDEO OUT General notes - Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings. Please refer to the manuals of your TV,VCR, Stereo System or other devices as necessary to make the best connections. - Do not connect your DVD-player via your VCR. The video quality could be distorted by the copy protection system. - For better sound reproduction, connect the player's audio out jacks to the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See 'Connecting to optional equipment'. Caution: Do not connect the player's audio out jack to the phono in jack of your audio system. Connect to a TV Component Video (Y CR CB) connection 1 Connect the CR, CB,Y jacks on the DVD-player to the corresponding jacks on the TV (cable not included) (A). 2 Connect the audio Left and Right out jacks to the audio left/right in jacks on the TV (C). S-Video (Y/C) connection 1 Connect the S-Video jack on the DVD-player to the S-Video in jack on the TV using an optional S-Video cable (B). 2 Connect the audio Left and Right out jacks to the audio left/right in jacks on the TV (C). Video CVBS connection 1 Connect the Video out (CVBS) jack to the video in jack on the TV using the audio/video cable supplied (C). 2 Connect the audio Left and Right out jacks to the audio left/right in jacks on the TV. 16 PREPARATION