Philips DVDR3350H User manual - Page 25

English Step 3: Installation and Setup (continued) GENERAL settings (underlined options are the factory default settings) Auto Program Select to make automatic TV channel programming. SETUP MENU - GENERAL Auto Chapter Marker Record Quality Auto Program Manual Program A Use keys to highlight { Auto Program - Search } and 5min. press . SP A warning message will appear. Select OK OK and press OK on Search the remote control. Edit B Use keys to highlight { Tuner Input Source } and press to access the options: { Cable } - Select this if the recorder is connected via a cable box/ satellite receiver. { Air } - Select this if the recorder is connected directly to the antenna wall outlet. C Use keys to highlight CONOTKINUE and press OK. The automatic TV channel search will start. This process may take several minutes. Once complete, the total number of channels found will appear on the TV. Manual Program Manual Program Name Frequency Fine tuning Skip C h 0 0 1 0 7 3 .2 5 M h z Yes OK OK CANOCKEL Select to modify your preset TV channels. A Use keys to highlight { Manual Program - Edit } and press . The modify channel options will be displayed. B Use keys to one of the options and press . { Name } - Use CH+/ CH- to select by the channel name for modifying. { Frequency } - Select this to adjust the frequency of the channel. - Use keys to adjust the frequency. Press OK on the remote control to confirm the setting. { Fine tuning } - Select this to fine-tune the TV channel manually if the reception is poor. - Use keys to fine-tune the frequency. { Skip } - Select this to set the channel to be skipped. The skipped channels can only be accessed by pressing the corresponding number button on the remote control. - Use keys to select { Yes } if you wish to skip this channel. C To confirm the changes, select OK OK and press OK on the remote control exit to the previous screen. TIPS: Press to go access the options of an item in the menu. Press SETUP to exit the menu. 25