Philips FWC250 User manual - Page 21
Recording, Clock
View all Philips FWC250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
21 RECORDING CLOCK Dubbing tapes (from tape deck 2 to tape deck 1) 1 Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1. • Make sure both tapes have their full spool to the left. 2 Press PAUSE on tape deck 1. 3 Press RECORD on tape deck 1. ™ The REC starts flashing. 4 Press PLAYÉ on tape deck 2. • Recording will start automatically. 5 Press STOP•OPEN on tape deck 1 and tape deck 2 to stop dubbing. Notes: - At the end of side A, flip the tapes to side B and repeat the procedure. - Dubbing of tapes is only possible from tape deck 2 to tape deck 1. - To ensure good dubbing, use tapes of the same length. Recording from other sources (only on tape deck 1) 1 Load a blank tape into tape deck 1. 2 Press CD, TUNER or AUX. • Start playback of the selected source. 3 Press RECORD on tape deck 1 to start recording. ™ The REC starts flashing. 4 Press PAUSE to interrupt recording. 5 Press STOP•OPEN on tape deck 1 to stop recording. Note: - During recording, it is not possible to listen to another sound source. MINI HIFI SYSTEM DBB STANDBY-ON JOG CONTROL CD1 • 2 • 3 CD FM•AM TUNER TAPE 1 • 2 TAPE VIDEO AUX OPTIMAL vv vv TUNING DEMO STOP v PRESET v JAZZ ROCK SEARCH STOP• CLEAR PLAY• PAUSE PREV PROGRAM CLOCK•TIMER DIM NEXT TECHNO SOUND NAVIGATION - JOG VOLUME View Clock You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD,TUNER, etc.). The clock will be displayed for about seven seconds. • Press CLOCK•TIMER briefly (on the system only). ™ "10:38 PM or 22:38" (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode will be displayed if the clock is not set. Clock Setting The clock can be set in either 12- or 24-hour mode, e.g. "12:00 AM" or "00:00". Before setting the clock, you must be in the View Clock mode. 1 Press CLOCK•TIMER to select clock mode. 2 Press PROGRAM to select 12- and 24- hour mode. ™ If 12-hour mode is selected, "12:00" starts flashing and the AM lights up. ™ If 24-hour mode is selected, "00:00" star ts flashing. 3 Set the hour with à or á on the system. 4 Set the minute with í or ëon the system. pg 01-28/C250/37-En 21 12/6/00, 2:20 PM 3139 115 20353 (ENG)