Philips FWM70 User manual - Page 9
General Information
View all Philips FWM70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Supplied accessories (page 3 - P1) - Remote control and two AA batteries. - AM loop antenna - FM wire antenna - Video cinch cable (yellow) - AC power cord Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Care and safety information (page 3 - P2) Avoid high temperature, moisture, water and dust - Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust on the lens. - No objects filled with liquids, such as vases, shall be placed on the apparatus. - No naked flame sources, such as lighted candles, should be placed on the apparatus. - Don't expose the system to dripping or splashing. Avoid condensation problem - The lens may cloud over when the system is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates. Do not block the vents - In a cabinet, allows about 10cm (4 inches) of General Information free space all around the system for adequate ventilation. Care of discs - To clean a CD, wipe it in a straight line from the centre towards the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! - Write only on the printed side of a CDR(W) and only with a soft felt-tipped pen. - Handle the disc by its edge, do not touch the surface. Care of the cabinet - Use soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Finding a suitable location - Place the system on a flat, hard, and stable surface. Built-in safety circuit - Under extreme conditions, this system may switch to the standby mode automatically. If this happens, let the system cool down before reusing it. Power saving - This system is designed to use less than 1W of electricity when switched to the standby mode. Disconnect the AC power cord from the power outlet when not in use. 9