Philips FWP2000 User manual - Page 16

2 Press SOURCE repeatedly to select the disc source. 3 Press / to select a track. 4 Plug in a USB mass storage device (see 'Play from USB' on page 11). 5 Press CD RIP on the top panel to start recording the current track. »» [REC ONE] (record one) is displayed. »» At completion of the recording, [REC END] (record end) is displayed. Record all tracks 1 Load an audio CD. 2 Press SOURCE repeatedly to select the disc source. 3 Plug in a USB mass storage device. 4 Press CD RIP on the top panel twice to start recording. »» [REC ALL] (record all) is displayed. »» At completion of the recording, [REC END] (record end) is displayed. • To stop recording, press . Note •• Copyright-protected CD cannot be recorded. •• When the USB memory runs out, recording stops automatically. •• When you record a track, make sure that the whole file is recorded before you stop recording. Enjoy simultaneous play You can output audio to multiple compatible Hi-Fi systems (FWP1000) to enjoy simultaneous play. 1 Connect audio cables (white/red) to: • the AUDIO OUT (AUDIO L/R) sockets on the back panel of this unit. • the AUDIO IN (AUDIO L/R) sockets on a compatible Hi-Fi system (FWP1000). 2 Connect a signal cable (green) to: • the AUDIO OUT (SIGNAL) socket on the back panel of the unit. • the AUDIO IN (SIGNAL) socket on a compatible Hi-Fi system (FWP1000). 3 If you like, connect more compatible Hi-Fi systems (FWP1000) together in the same way. 4 Start play on this unit (FWP2000). »» You can hear music from the loudspeakers of all the Hi-Fi systems connected to each other. 14 EN