Philips FWT9200MU User manual - Page 20

8 Listen to radio Tune to a radio station 1 Press TUNER repeatedly to select FM or AM. 2 Press / or press and hold / for more than 2 seconds. »» [SEARCH] (search) is displayed. »» The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations manually You can program a maximum of 30 FM and 10 AM preset radio stations. 1 Tune to a radio station. 2 Press PROG to activate program mode. »» [PROG] (program) and a position number are displayed. 3 Press ALB/PRESET+/- to allocate a number to this radio station, then press PROG to confirm. 4 Repeat the above steps to program other stations. Tip •• To overwrite a programmed station, store another station in its place. Program radio stations automatically In the tuner mode, press and hold PROG for more than 2 seconds to activate automatic program mode. »» [AUTO] (auto) is displayed. »» The unit automatically stores radio stations with sufficient signal strength. »» After all available radio stations are stored, the first stored radio station is broadcast automatically. Select a preset radio station In tuner mode, press ALB/PRESET+/- to select a preset number. Tip •• Position the antenna as far as possible from TV,VCR or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. Change AM tuning grid In some countries, the AM radio frequency step between adjacent channels is 10 kHz (9 kHz in some areas). 1 Select the tuner source. 2 Press and hold for more than 5 seconds. »» The frequency step is changed to 9 kHz or 10 kHz. »» All preset stations are erased and reprogrammed in AM mode. 18 EN