Philips FWT9200MU User manual - Page 24

11 Other features Set the alarm timer This music system can be used as an alarm clock.You can select disc, radio or USB as alarm source. Note •• If you have set a record timer and an alarm timer, only the latest timer shall be activated. 1 Ensure that you have set the clock correctly. 2 Press to switch to standby mode. 3 Press and hold SLEEP/TIMER for more than 2 seconds. »» A prompt to select the source is displayed. 4 Press CD, or TUNER or USB to select a source. 5 Press SLEEP/TIMER to confirm. »» The clock digits are displayed and begin to blink. 6 Press ALB/PRESET+/- to set the hour. 7 Press / to set the minute. 8 Press SLEEP/TIMER to confirm. »» The timer is set and activated. To deactivate or re-activate an alarm timer 1 In standby mode, press SLEEP/TIMER repeatedly. »» If the timer is activated, s is displayed. »» If the timer is deactivated, disappears. Tip •• Bluetooth and MP3 LINK/PC IN mode cannot be selected as the source of the alarm timer. •• If disc or USB source is selected but no audio file can be played, radio is activated automatically. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed. To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. »» When sleep timer is deactivated, disappears on the display. Karaoke You can connect a microphone and sing along with a music source. 1 Turn MIC 1 VOL/MIC 2 VOL to the minimum level. 2 Connect a microphone to the microphone port on the unit. 3 Press CD, or TUNER, or USB, or PC IN/AUDIO IN to select the source, and start play. 4 Sing through the microphone. • To adjust the volume of the source, press VOL +/-. • To adjust the volume of the microphone, turn MIC 1 VOL/MIC 2 VOL. 22 EN