Philips HD8964 User manual - Page 92
Machine actions, Causes, Solutions
View all Philips HD8964 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
90 ENGLISH Machine actions Causes Solutions Milk does not froth. The milk dispensing spout has not Check that the milk dispensing spout has been been pulled out. pulled out correctly up to the " " icon. The carafe has not been correctly reassembled or with all its components. Make sure the tube is correctly inserted. All its components have to be correctly reassembled, as described in the "Weekly cleaning of the Milk Carafe" section. The brew group cannot be The brew group is out of place. removed. Turn on the machine. Close the service door. The brew group automatically returns to the initial position. The coffee grounds drawer is inserted. Remove the coffee grounds drawer before removing the brew group. There is too much ground coffee under or over the brew group. The coffee used may not be suitable for automatic machines. It may be necessary to change the type of coffee or the coffee grinder settings (see the "Adjusting the Ceramic Coffee Grinder" chapter). The machine is adjusting the coffee grinder for a new kind of coffee beans or pre-ground coffee. The machine automatically adjusts itself after brewing several cups of coffee to optimise the extraction in relation to the compactness of the ground coffee. It may be necessary to brew 2 or 3 products to adjust the coffee grinder completely. This is not a malfunction of the machine. The machine produces too Adjust the coffee grinder. humid or too dry coffee grounds. Adjusting the ceramic coffee grinder affects the quality of residues. If the residues are too humid, set a coarser grind. If the residues are too dry, set a finer grind. Refer to the "Adjusting the Ceramic Coffee Grinder" chapter. Coffee is too weak (see note). This might occur when the machine Brew some cups of coffee as described in is automatically adjusting the dose. the "Saeco Adapting System" chapter. The ground coffee is too coarse. Change coffee blend or adjust grinding as explained in the "Adjusting the Ceramic Coffee Grinder" chapter. The coffee bean hopper selector switch has been shifted. Move the selector switch to the " " position.